Gear Lever Bushings
Gear lever/shifter bushings specifically measured for the Autozam AZ-1 (PG6SA) and Suzuki Cara (PG6SS). This may fit other models. Cross reference with part numbers below.
The large bushing goes on the ball of the shifter, most cars have a split two part design that isn't wonderful and often has a fair bit of play, but this single piece design is unfortunately no longer available. Expands and clicks over the ball, and has basically no slop once installed.
It replaces #4 and #5 circled in green in the parts diagram and #6 (red) will no longer be used and removed.
The little bushing goes between the main shifter shaft and the rocker arm.
This replaces #8 in the parts diagram.
Apply a bit of lube of your choice to the bushings. ex: silicone, PTFE, white lithium, graphite, etc.
Replaces part numbers:
(Large)
Suzuki: 28143-50F00, 28149-50F00, 28145-50F00, 2814350F00, 2814950F00, 2814550F00
Autozam/Mazda: P10046082, P10046088
(Small)
Suzuki: 28150-75B00, 2815075B00
Autozam/Mazda: A01146053
Printed in SLS PA12 nylon.
Made in Australia
Gear lever/shifter bushings specifically measured for the Autozam AZ-1 (PG6SA) and Suzuki Cara (PG6SS). This may fit other models. Cross reference with part numbers below.
The large bushing goes on the ball of the shifter, most cars have a split two part design that isn't wonderful and often has a fair bit of play, but this single piece design is unfortunately no longer available. Expands and clicks over the ball, and has basically no slop once installed.
It replaces #4 and #5 circled in green in the parts diagram and #6 (red) will no longer be used and removed.
The little bushing goes between the main shifter shaft and the rocker arm.
This replaces #8 in the parts diagram.
Apply a bit of lube of your choice to the bushings. ex: silicone, PTFE, white lithium, graphite, etc.
Replaces part numbers:
(Large)
Suzuki: 28143-50F00, 28149-50F00, 28145-50F00, 2814350F00, 2814950F00, 2814550F00
Autozam/Mazda: P10046082, P10046088
(Small)
Suzuki: 28150-75B00, 2815075B00
Autozam/Mazda: A01146053
Printed in SLS PA12 nylon.
Made in Australia
Gear lever/shifter bushings specifically measured for the Autozam AZ-1 (PG6SA) and Suzuki Cara (PG6SS). This may fit other models. Cross reference with part numbers below.
The large bushing goes on the ball of the shifter, most cars have a split two part design that isn't wonderful and often has a fair bit of play, but this single piece design is unfortunately no longer available. Expands and clicks over the ball, and has basically no slop once installed.
It replaces #4 and #5 circled in green in the parts diagram and #6 (red) will no longer be used and removed.
The little bushing goes between the main shifter shaft and the rocker arm.
This replaces #8 in the parts diagram.
Apply a bit of lube of your choice to the bushings. ex: silicone, PTFE, white lithium, graphite, etc.
Replaces part numbers:
(Large)
Suzuki: 28143-50F00, 28149-50F00, 28145-50F00, 2814350F00, 2814950F00, 2814550F00
Autozam/Mazda: P10046082, P10046088
(Small)
Suzuki: 28150-75B00, 2815075B00
Autozam/Mazda: A01146053
Printed in SLS PA12 nylon.
Made in Australia
See installation video here: